FEATURES

EXCLUSIVE TRACK DESIGN
The plastic plate on the track is specially designed for easy replacement, whilst providing a positive feeding effect without damaging the workpiece surfaces.
The "White Dog Plate" is specifically designed for providing smooth feeding of short workpieces. Simply replace the plate when working on longer workpieces.


HIGH PRODUCTION CAPABILITY
The GRS-320S can handle ultra short workpieces, with a minimum length of only 8cm, whilst maintaining a high rate of production.


EXTREMELY SMOOTH FEEDING EFFECT
The plates and dogs can be easily fitted onto the track at any desired distance. The specially designed feeding mechanism permits the smooth feeding of short workpieces without jamming.


AUXILIARY PRESSURE ROLLER
The use of the assistant pressure roller enables the cutting of long timber.

AUTOMATIC CHAIN LUBRICATION
The automatic chain lubricator periodically delivers the correct amount of lubricant to the chain, ensuring smooth running at all times. An alarm alerts the operator when there is a lack of oil.


GREAT THROAT CAPACITY
760mm throat clearance from chain centre to arm.

CONVENIENT, ACCURATE SAWBLADE REPLACEMENT
An independent shaft is provided in the machine frame for convenient, accurate and time saving sawblade replacement.

• The rail is exclusively designed to avoid damaging the wood.
• Pressure rolls, supported on both sides, hold stock firmly and evenly.
• The entire head mechanism features powered raising and lowering.
• Variable feed speed permits the cutting of a variety of stocks, hard or soft, thick or thin.
• Double-side suspension support pressure plate. This design also helps prevent cracked or broken workpieces from damaging the saw arbour or sawblade.

SPECIFICATIONS
Maximum cutting thickness	130mm
Maximum cutting width	320mm
Maximum infeed width	760mm
Minimum length of cut	80mm
Short limit ratio thickness per length	2 : 5
Sawblade diameter	Ø255(10-50), Ø305(10-80), Ø355(10-105), Ø405(10-130)mm
Saw spindle diameter	Ø55mm
Sawblade keyway	20mm(W) × 2
Distance between keyways	80mm
Feed speed (variable)	9-36M/min.
Feed track width	335mm
Sawblade bore diameter	Ø70mm
Spacing collar diameter (I.D./O.D.)	Ø70mm / 95mm
Spindle speed	3200RPM (50Hz)
Saw drive motor	30HP, 50HP, 60HP, 75HP
Feed speed motor	2HP, 3HP
Head elevation motor	¼HP
Dust hood outlet diameter	Ø152mm(6") × 2
Table area (L×W)	1800 × 880mm
Table height from floor	850mm
Machine dimensions (L×W×H)	2300 × 1500 × 1600mm
Packing dimensions (L×W×H)	2400 × 1700 × 1900mm
Net weight	(approx) 2150kgs
Gross weight	(approx) 2600kgs