Home Product List
- Exclusive laser projection system.
- Raising & lowering pressure roller mechanism.
- Variable feed speed.
Exclusive movable double
sawblade configuration.
|
FEATURES
POWERED LOG TURN-OVER
The log turn-over is easily made by operating a lever to select the optimum cutting direction.
TOP AND BOTTOM SAW CONFIGURATION
This provides big cutting capacity of thickness. Positioning is controlled by a digital controller combined with a linear motion guide for accurate setting and cutting.
CUTTING OUT SQUARE WOOD
The machine performs trimming operations for the right and left side at the same time.
CENTRALISED CONTROL PANEL
 Amp meter for each saw head shows load percentage of motor. Width of cut can be manually adjusted by a shifting lever or set by the digital controller. 24 sizes are memorised with positioning of cut.
ISOLATED CONTROL BOX
The control panel provides digital displays for sawblade traverse, pressure roller elevation and feed rate. They can be adjusted and controlled from the control panel.
|
- Exclusive laser projecting system ensures accuracy.
- Sawblade movement is driven through a precision ball screw, incorporated with a linear motion guide slideway for accurate, effortless traverse.
- Sawblade traverse is encoder controlled.
- Digital displays for sawblade traverse, pressure roller elevation, and feed rate.
- Pressure rolls, supported on both sides, hold stock firmly and evenly.
- The entire pressure roller mechanism features powered raising and lowering.
- The exclusive roller motion, with a concave design, allows for effortless chain feed, smooth running, minimum friction and increased durability.
- Variable feed speed permits the cutting of a variety of stock, hard or soft, thick or thin.
| SPECIFICATIONS |
| Cutting thickness |
10-170mm |
| Maximum infeed width |
750mm |
| Minimum length of cut |
600mm |
| Maximum cutting width |
600mm |
| Saw adjustment distance |
610-50mm |
| Sawblade diameter |
Ø455mm (18") |
| Saw spindle diameter |
Ø40mm |
| Feed speed (Variable) |
7.5-30M/min (50Hz), 9-36M/min (60Hz) |
| Spindle speed |
2800RPM (50Hz), 3200RPM (60Hz) |
| Saw drive motor |
20HP-30HP × 2 |
| Head elevation motor |
½HP |
| Saw adjustment motor |
½HP × 2 |
| Feed drive motor |
3-5HP |
| Dust hood outlet diameter |
Ø100mm(4") × 4 |
| Front roller conveyor size |
680 × 2750mm |
| Rear roller conveyor size |
680 × 3180mm |
| Machine dimensions (L×W×H) |
3250 × 2500 × 1950mm |
| Packing dimensions (L×W×H) |
33707450 × 2620 × 2170mm |
| Roller conveyor packing weight |
1500kgs |
| Front roller conveyor weight |
470kgs |
| Rear roller conveyor weight |
650kgs |
| Net weight |
(approx) 4600kgs |
| Gross weight |
(approx) 5600kgs |
|
